Lowered Customer’s Lighting Bill

[Desk lamp; table lamp]: can be placed on a flat bench seat of the lights, bring a shade 2. [Reading lamp]: designed for the reading lamp or the
daytime running light with the lamp used to illuminate people's lives is a household appliances. It is generally divided into two types, one is the high column, one is a clip. It works mainly to light concentrated in one small area, to focus light, easy to work and study. Ordinary lamp with incandescent or energy-saving light bulbs are light bulbs. Some lamps have emergency functions, without electricity for a power outage has been used for emergency lighting. The principle is to touch the internal lamp installed electronic touch-ic touch with the lamp at the electrodes to form a control loop. When the human touch to the induction of the electrode, the touch signal to generate a pulse by pulse DC signal sent to the touch-sensitive side, then touch-sensitive side will issue a trigger pulse signal, you can control the lights; such as touch once again, the touch signal will then generate a pulse by pulse DC signal sent to the touch-sensitive side, you touch the sensitive side will stop issuing the trigger pulse signal, when the AC zero crossing, natural light is off. But sometimes after a power failure or voltage instability will have their own light situations, the received signal if the touch sensitivity is also a good paper or cloth can be controlled
Peitou, Taipei -- (SBWIRE) -- 07/28/2011 -- GlacialLight, a sub-division of the experienced technology manufacturer GlacialTech Inc., is pleased to announce that their well-designed, environmentally-friendly lines of LED lighting products are being used in numerous applications around the world and providing users with energy-saving light of the highest quality. In the Taiwanese city of Kaohsiung, Marrons Cake Factory has greatly benefited by replacing their traditional T8 tube lights with GlacialLight’s 595 x 595mm LED Panel Lights. Since the switch, Marrons has seen a 61% reduction in energy used for lighting, as well as better light quality. Like Marrons, consumers around the world, using GlacialLight’s products, are reporting energy savings and increases in lighting quality.

With no perceptible flickering, GlacialLight’s excellently designed LED display have allowed Marrons Cake Factory to save money because of their exceptional lifespans and low power-consumption levels. The factory has replaced 720 traditional T8 tube lights (180 sets of four tubes) with a much lower number of GlacialLight LED Panel Lights. 120 GlacialLight Panel Lights now provide Marrons employees with better light quality while saving the company money. With employees enjoying better light quality and management enjoying bottom-line savings, everyone at Marrons has benefited.

GlacialLight is excited to see their product lines being used to make other businesses more successful and at the same time benefiting society as a whole by offering lighting products that have longer lifetimes and higher energy-saving levels, as compared to traditional lighting products, and that emit no harmful UV or IR radiation and contain no hazardous materials such as mercury.

Not the same light

Application advantage

LED lamp has environmental protection, long life, small volume, high directivity, solid form is not easy to damage ... Etc., have gradually replaced the traditional tungsten filament lamp ( incandescent), CCFL fluorescent lamp, but in response to the different application requirements

LED component emitting characteristics, efficiency is the key to the base material and the wafer growth technology differences.

Strengthen the packaging technology to improve the light efficiency and light type

Observation of the common high power LED bulbs technology, can be divided into the single chip package, integrated multi-chip package and chip encapsulation 3 kinds of techniques, and through the packaging technology optimization, can improve the LED chip light emitting efficiency, heat dissipation effect and the reliability of the product.

LED lighting lamps and lanterns of efficacy

Conventional LED street light of the chip, not stem weakness, developed a crystal coated chip mounting method. The surface of the two electrode over the bottom and the direct use of silver soldered to the metal heat conducting substrate. So heat transfer by conduction silver adhesive than previous solid crystal directly.

Recently, South Korea, Taiwan large power LED chip also has to add a layer of metal coating on a sapphire substrate method, it can also be used to replace the silver paste silver paste to the solid crystal. Silver paste after curing, thermal conductivity near sterling silver, silver plastic thermal rate to be high.

Rare earth fluorescent powder is continuously improved, so that the overall lighting industrial benefit - metal halide lamp, high pressure sodium lamp, fluorescent tube energy-saving lamp and the new large power LED spotlight

LED chip if not directly to COB solid crystal on the circuit substrate, will find a fast heat conduction material as with the radiating fins into an intermediate medium. Copper is a metal heat conducting only slightly inferior to the silver material, low price, so the copper is the most common large power LED tube light chip heat transfer material.